NFC Studio

NFC troubleshooting

Most NFC problems come from antenna placement, tag capacity, protection, or a technology iPhone does not expose.

iPhone does not detect the tag

Hold the top edge of the unlocked iPhone directly against one tag and keep it still. Move the top edge slowly across the tag. Remove thick or metal cases and separate stacked tags.

The tag reads but will not write

Check writable status, NDEF support, remaining capacity, password protection, and permanent lock state. iPhone cannot universally format every blank or proprietary chip.

The payload is too large

NFC Studio calculates the complete encoded NDEF message, including record overhead. Shorten values or use a tag with greater NDEF capacity.

Verification failed

Keep the tag against the top of the iPhone until the write and read-back finish. Scan the tag before retrying if it moved after the write callback.

A Wi-Fi, calendar, or custom record does nothing

NFC Studio writes the standards-based record. The receiving phone may require a compatible app or may not support that record type automatically.

Password authentication fails

Use the exact password configured on that tag. Password operations are limited to verified compatible NTAG21x and Ultralight EV1 tags. A permanently locked tag cannot be unlocked.

A payment or access card is unreadable

That is expected. iPhone does not expose unrestricted payment credentials, access-card sectors, MIFARE Classic memory, or every proprietary protocol to third-party apps.

Still stuck?

In NFC Studio, open Settings and prepare a redacted diagnostics file. It excludes UIDs, payloads, URLs, passwords, AES keys, and raw command contents.

Contact support@nfcstudio.app